features n 3 ka, 8/20 s surge capability n low clamping voltage under surge n bidirectional tvs n surface mount package n excellent overtemperature performance applications n high power dc bus protection absolute maximum ratings (@ t a = 25 c unless otherwise noted) ptvs3-xxxc-m series high current tvs diodes *rohs directive 2002/95/ec jan. 27, 2003 including annex and rohs recast 2011/65/eu june 8, 2011. specifications are subject to change without notice. users should verify actual device performance in their specific applications. the products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. rating symbol value unit repetitive standoff voltage ptvs3-066c-m ptvs3-076c-m v wm 66 76 v peak current rating per 8/20 s iec 61000-4-5 i ppm 3 ka operating junction temperature range t j -55 to +125 c storage temperature range t s -55 to +150 c general information bourns ? model ptvs3-xxxc-m high current bidirectional tvs diodes are designed for use in high power dc bus clamping applications. these devices offer bidirectional port protection and are available with standoff voltage ratings of 66 v and 76 v. the devices are rohs* compliant and are designed to meet iec 61000-4-5 8/20 s current surge requirements. *rohs compliant lead free *rohs compliant versions available lead free versions are rohs compliant* electrical characteristics (@ t a = 25 c unless otherwise noted) parameter test conditions min. typ. max. unit i d standby current v d = v wm 10 a v (br) breakdown voltage i br = 10 ma ptvs3-066c-m ptvs3-076c-m 72 85 76 90 80 95 v v c clamping voltage i pp = 3 ka ptvs3-066c-m ptvs3-076c-m 120 135 v v (br) temperature coeffcient 0.1 %/c c capacitance f = 10 khz, v d = 1 vrms ptvs3-066c-m ptvs3-076c-m 2.0 1.7 nf asia-pacifc: tel: +886-2 2562-4117 ? email: asiacus@bourns.com emea: tel: +36 88 520 390 ? email: eurocus@bourns.com the americas: tel: +1-951 781-5500 ? email: americus@bourns.com www.bourns.com
exposed dc power interface + - 120 0 0 25 50 100 75 125 150 175 ambient temperature (c) percent of rated value 20 40 60 80 10 0 12 0 0 03 02520 1510 5 i pp ? peak pulse current (% of i pp ) t ? time (s) test waveform parameters t t = 8 s t d = 20 s t d = t | i pp /2 110 100 90 80 70 60 50 40 30 20 10 v br change vs. temperature (%) 12 2 4 6 8 10 -6 -4 -2 0 -8 -10 -12 -40 -20 0 20 40 60 80 100 120 140 junction temperature (c) normalized to 25 c
performance graphs v-i characteristic typical v br vs. junction temperature typical surge current derating current 8/20 s waveform per iec 61000-4-5 this graph shows the typical device surge current derating versus ambient temperature when subjected to the 8/20 s current waveform per the iec 61000-4-5 specifcation. this device is not intended for continuous operation at temperatures above 125 c. application a typical application for power tvs products includes dc power line protection. specifications are subject to change without notice. users should verify actual device performance in their specific applications. the products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. exposed dc power interface + - 120 0 0 25 50 100 75 125 150 175 ambient temperature (c) percent of rated value 20 40 60 80 10 0 12 0 0 03 02520 1510 5 i pp ? peak pulse current (% of i pp ) t ? time (s) test waveform parameters t t = 8 s t d = 20 s t d = t | i pp /2 110 100 90 80 70 60 50 40 30 20 10 v br change vs. temperature (%) 12 2 4 6 8 10 -6 -4 -2 0 -8 -10 -12 -40 -20 0 20 40 60 80 100 120 140 junction temperature (c) normalized to 25 c
ptvs3-xxxc-m series high current tvs diodes typical part marking ptvs3-066c-m ........................................................................ 3066 ptvs3-076c-m ........................................................................ 3076 specifications are subject to change without notice. users should verify actual device performance in their specific applications. the products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. how to order ptvs 3 - xxx c-m series ptvs = power tvs high current diode peak current rating 3 = 3 ka repetitive standoff v oltage 066 = 66 v 076 = 76 v suffx c = bidirectional device m = surface mount dimensions: mm (inches) this is an rohs compliant*, molded package with 100 % sn on the terminations, and a fammability rating of ul 94-v-0. e d e1 a c b l b1 l2 l1 2.54 (0.100) 1.35 (0.053) 5.33 (0.210) 3.51 (0.138) 18.31 (0.721) 10.80 (0.425) 13.72 (0.540) product dimensions recommended pad layout e d e1 a c b l b1 l2 l1 2.54 (0.100) 1.35 (0.053) 5.33 (0.210) 3.51 (0.138) 18.31 (0.721) 10.80 (0.425) 13.72 (0.540) dimensions: mm (inches) dim. min. max. a 6.94 (0.273) 7.24 (0.285) b 5.15 (0.203) 5.65 (0.222) b1 10.55 (0.415) 11.05 (0.435) c 0.37 (0.015) 0.45 (0.018) d 13.45 (0.530) 14.60 (0.575) e 17.85 (0.703) 18.72 (0.737) e1 15.50 (0.610) 16.05 (0.632) l 2.30 (0.091) 2.80 (0.110) l1 3.35 (0.132) 3.75 (0.148) l2 13.16 (0.518) 13.76 (0.518) mold fash or protrusion shall not exceed 0.25 mm.
20.00 0.10 (.787 .004) 2.00 0.10 (.079 .004) 4.00 0.10 (.157 .004) 14.20 0.10 (.559 .004) 1.75 0.10 (.069 .004) 1.50 +0.1/-0 (.059 +.004/-0) dia. 28.40 0.10 (1.118 .004) 32.00 0.30 (1.260 .012) 2.00 (.079) dia. 8.00 (.315) 14.20 (.559) 7.45 (.039) 17.80 (.701) 18.95 (.746) user direction of feed 400 pcs. per reel 03/17 packaging information the product will be dispensed in tape and reel format (see diagram below). 2.2 0.2 (.087 .008) 330.0 1.5 (12.992 .059) dia. see detail a 38.40 (1.512) max. 32.40 + 2.00/-0 (1.276 .079/-.0) 100.0 1.5 (3.937 .059) dia. 17.2 0.2 (.677 .008) 13.0 +0.5/-0.2 (.512 +.020/-.008) dia. detail a specifications are subject to change without notice. users should verify actual device performance in their specific applications. the products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
legal disclaimer notice this legal disclaimer applies to purchasers and users of bourns ? products manufactured by or on behalf of bourns, inc. and its afliates (collectively, bourns). unless otherwise expressly indicated in writing, bourns ? products and data sheets relating thereto are subject to change without notice. users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for bourns ? products. the characteristics and parameters of a bourns ? product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on bourns knowledge of typical requirements in generic applications. the characteristics and parameters of a bourns ? product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the bourns ? product with other components in the users application, or (ii) the environment of the user application itself. the characteristics and parameters of a bourns ? product also can and do vary in diferent applications and actual performance may vary over time. users should always verify the actual performance of the bourns ? product in their specifc devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for diferences between laboratory and real world conditions. unless bourns has explicitly designated an individual bourns ? product as meeting the requirements of a particular industry standard (e.g., iso/ts 16949) or a particular qualifcation (e.g., ul listed or recognized), bourns is not responsible for any failure of an individual bourns ? product to meet the requirements of such industry standard or particular qualifcation. users of bourns ? products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. bourns ? products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. unless expressly and specifcally approved in writing by two authorized bourns representatives on a case-by-case basis, use of any bourns ? products in such unauthorized applications might not be safe and thus is at the users sole risk. life-critical applications include devices identifed by the u.s. food and drug administration as class iii devices and generally equivalent classifcations outside of the unit ed states. bourns expressly identifes those bourns ? standard products that are suitable for use in automotive applications on such products data sheets in the section entitled applications. unless expressly and specifcally approved in writing by two authorized bourns representatives on a case-by-case basis, use of any other bourns ? standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the users sole risk. if bourns expressly identifes a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identifcation means that bourns has reviewed its standard product and has determined that if such bourns ? standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. any reference to bourns ? standard product in the data sheet as compliant with the aec-q standard or automotive grade does not by itself mean that bourns has approved such product for use in an automotive application. bourns ? standard products are not tested to comply with united states federal aviation administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. bourns expressly identifes bourns ? standard products that are suitable for use in aircraft or space applications on such products data sheets in the section entitled applications. unless expressly and specifcally approved in writing by two authorized bourns representatives on a case-by-case basis, use of any other bourns ? standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the users sole risk. the use and level of testing applicable to bourns ? custom products shall be negotiated on a case-by-case basis by bourns and the user for which such bourns ? custom products are specially designed. absent a written agreement between bourns and the user regarding the use and level of such testing, the above provisions applicable to bourns ? standard products shall also apply to such bourns ? custom products. users shall not sell, transfer, export or re-export any bourns ? products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use bourns ? products or technology in any facility which engages in activities relating to such devices. the foregoing restrictions apply to all uses and applications that violate national or inter national pr ohibitions, including embargos or international regulations. further, bourns ? products and bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. bourns ? products may not, without prior authorization from bourns and/or the u.s. government, be resold, transferred, or re-exported to any party not eligible to receive u.s. commodities, software, and technical data. to the maximum extent permitted by applicable law, bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profts, and (ii) any and all implied warranties, including implied warranties of ftness for particular purpose, non-infringement and merchantability. for your convenience, copies of this legal disclaimer notice with german, spanish, japanese, traditional chinese and simplifed chinese bilingual versions are available at: web page: http://www.bourns.com/legal/disclaimers-terms-and-policies pdf: http://www.bourns.com/docs/legal/disclaimer.pdf c1753 05/17/18r
|
